Questions?

Cold Room Ventilation

Effective Cold Room Ventilation in Ottawa

Ottawa & Montreal

 
Cold room ventilation is something that few people know much about and even fewer people do properly. In fact, most people in Montreal and Ottawa tend to completely ignore their cold storage rooms simply because they’re not a frequently used or essential part of a house.

However, cold rooms, like any other room in your home, require regular maintenance and upkeep. Part of that maintenance is ensuring proper cold room ventilation.

Proper ventilation is crucial to preventing condensation in cold storage rooms. Otherwise, you could find yourself face-to-face with a serious mold and indoor air quality (IAQ) issue.

At Mold Busters, we’ll use our infrared cameras to inspect your cold room for defects like air leakage, moisture intrusion, missing insulation and improperly installed vapour barriers, all of which contribute to mold growth. We’ll then be able to put in place an effective solution for your specific ventilation needs.

So, if you have a cold storage room and are worried about potential mold problems, contact Mold Busters today. Now servicing Ottawa, Montreal and surrounding areas.

Mold Prevention and Removal in Cold Rooms
Mold Prevention and Removal in Cold Rooms

Why are cold storage rooms problematic?

Cold rooms are typically small, unfinished rooms with concrete floors, no insulation, no heating and no drywall. As such, they are highly prone to condensation. This occurs when warm air from other rooms enters the cold storage, makes contact with a cold surface and forms water droplets on it.

A lack of air flow in the cold storage room also means that this surface moisture will not dry right away, providing the perfect conditions for mold and mildew growth, especially if there are old boxes, newspapers and perishable foods lying around, feeding the mold.

The solution to cold room mold

If you want an effective solution for mold in your cold room, your main priority should be ensuring proper ventilation, as this is the key to reducing indoor humidity and moisture levels.

You should also make sure to install insulation or vapour barriers that will keep warm air and moisture out of your cold room. The insulation should be completely sealed against the concrete and should extend from the underside of the cold room ceiling right down to the floor.

To promote air flow and air circulation, we recommend having two vents in your cold room—one at the top and one at the bottom of the room—to allow any condensation to dry out before it can lead to mold.

If you have any doubts about how well your cold room is keeping cold air in and warm air out, book a complete infrared scan with Mold Busters. It’s a non-contact, non-destructive way of finding air leakage, moisture, mold, poorly installed insulation and missing vapour barriers.